Bonded coatings offer many lubrication advantages compared to conventional oils and greases for high temperatures, special hygiene requirements or highly loaded machine elements. Our special tribo-coatings help you optimise friction coefficients and sliding properties of your components and ensure longer lifetimes.
Bonded coatings form a continuous, dry and adherent friction-reducing lubricant layer on your materials and components. While oils and greases may drip off the friction point, with bonded coatings the surroundings remain clean, which is a particularly important benefit when it comes to hygiene and safety requirements. Bonded coatings can also be used at temperatures exceeding 300 °C. Our product range includes bonded coatings for metal surfaces, plastics and elastomers. They help you to reduce component wear and maintenance costs considerably.
Corrosion may cause considerable damage to your machines and installations which are often exposed to friction and wear. Our speciality lubricants lubricate your components and protect them reliably against corrosion.
Corrosion prevention is just one factor in extending a component's life. We always recommend seeing corrosion protection in conjunction with all the tribological requirements. For example, in the marine industry, components and machines are not only exposed to corrosive salt water, but also to vibration and high mechanical loads. In the automotive industry, door locks require a lubricant offering good corrosion protection as well as optimised friction properties and a wide temperature range. Only a speciality lubricant covering all these requirements offers real added value: longer relubrication intervals, high thermal resistance and minimised wear.
The subject of sustainability is increasingly challenging for many industries. As a manufacturer of speciality lubricants, it is our task to assist our customers, in achieving their sustainability goals by providing them with even more energy efficient and environmental friendly lubricants.
In many production sectors, automatic lubricant dispensers perfectly complement the use of speciality lubricants. They help you to apply the correct lubricant quantity consistently while considerably reducing maintenance costs.
Many components and machines must be relubricated on a regular basis, which often requires considerable effort. The lubrication points may be difficult to access or distant from one another, and sometimes relubrication simply takes a lot of time because there are so many points to lubricate. Our Klübermatic lubricant dispensers offer you many benefits: they allow you to lubricate machines, sub-assemblies and installations cleanly and continuously with just the right amount of lubricant. At the same time, plant availability increases, as operation does not have to be interrupted for relubrication.
Lubricant sprays ensure quick and easy lubrication and relubrication of areas difficult to access and for spot application. We offer speciality lubricants in spray cans for a wide range of applications to protect your machines and components reliably against wear.
Sprays are an easy-to-use alternative to conventional lubricant containers. They lubricate chains, linear guides or cables and can be used for assembly, cleaning, coating, as contact spray, rust remover and in metalworking. Additionally, sprays are suitable for testing purposes before replacing a lubricant.
Greases are the best choice if the lubricant is to stay in place at the friction point long term. Not only do they provide good lubrication; they also protect the friction point against external influences like splash water, humidity, contamination, corrosion and wear.
Things run smoother with the right lubricating oil. Speciality lubricating oils with good penetration and wetting abilities protect reliably against friction and wear. It's important to select the right oil for your application and you will find the matching solution for your application in our wide product range.
High-quality lubricating oils have a good wetting ability and spread easily across the components. Their good viscosity-temperature behaviour ensures that the oil film viscosity is maintained, making them a good choice for high speeds and high temperature applications. Many of our lubricating oils also remove heat, contaminating particles and residues from the friction points, allowing continuous cooling, cleaning and lubrication.
Lubricating and assembly pastes are often used under extreme conditions – for example with temperatures up to 1200 °C, where there are high-frequency oscillations or at very low speeds. Our lubricating pastes protect your components reliably against premature wear.
Lubricating and assembly pastes containing a high percentage of solid lubricating particles form an efficient lubricating film to separate component surfaces reliably even under extreme conditions. They are particularly suitable for applications requiring high load-carrying capacity, particular emergency lubricating properties and permanent media resistance. Our speciality pastes offer many advantages: minimised tribocorrosion, stick-slip and anti-fretting corrosion protection, prevention of adhesive wear or seizure of the lubricated components. The service life of your components increases.
The right lubricant can make the assembly of small parts considerably easier. Our lubricating waxes ensure your surfaces are dry to the touch for clean and quick working processes while protecting your components reliably against corrosion.
Lubricating waxes form a dry to the touch layer on the surface to ensure reliable lubrication while reducing boundary and mixed friction. Dry lubrication offers you many benefits: small parts like bolts, bushes or rivets can be installed without difficulty. Our lubricating waxes prevent squeaking hinges and ensure smooth running and operation of parts in frictional contact. While greases are often very susceptible to contamination, the surfaces of wax-lubricated components stay cleaner. Additionally, waxes reliably protect components like chains and cables against corrosion.
In metal forming processes, the right lubricant and release agent are essential performance factors. While the lubricant is very important for the forming process as such, it is also vital it will not negatively affect subsequent processes.
It is therefore important that the lubricants be easy to apply - and easy to remove once the forming operation is completed. Ideally, they should "leave no trace".
Our special products can help make your forming process more economical - be it due to lower consumption, less wear or simplified aftertreatment.
With the right lubricant you can extend the service life of your machines and components. With the right service you can also save energy and maintenance costs and increase your productivity, providing you with real added value.
Lubricants account for just a small percentage of your overall operating costs spend, but offer a huge potential for cost savings. Properly selected and used, speciality lubricants reduce energy, replacement and labour costs and increase productivity. We created KlüberEfficiencySuppor, an extensive package of services designed to reduce your operating costs considerably. This package includes a systematic analysis of your processes and production parts as well as practical solutions tailored to your needs. We check the effectiveness of our measures during operation and provide you with tangible results in the form of reliable calculations and reports. We also share our know-how with your staff through individual training programems ensuring you will benefit from sustainable savings.